Specifications
- Detector Frequency:
-CDMA:824-849MHZ
-GSM:890-915MHZ
-DCS:1710-1785MHZ
-PHS/3G:1920-1980MHZ
-4G LTE/Wimax (add frequency optional )
- Available system: world wide cell phone network
- Each frequency band has a corresponding antenna, so there are 4 antennas on the equipment.
- Antenna: 4pcs ( Please fix the antenna follow the mark in the unit)
- Power supply: AC adaptor,(AC 110-240V DC9V)
- Range of the signal detector: 1-15M (It still depends on the strength signal in given area)
- The green light on means the main system work well, the red light on shows that the RF inspecting system works well.
- When the detector is working, the TTL signal and RS-485 communication signal are output by the system.
- Sensitivity of the signal detector : Adjusted knobs, independent frequency. The green light on means the main system work well, the red light on shows that the RF inspecting system works well.
- Environment Temperature:-20°C ~ 65°C
- Relative humility:30% ~ 70%
- Dimension:230*85*30mm
- Weight:1200g
Accessories
- Power adaptor
- Alarming System
- Antenna
It is designed with the alarming system, if so once the cell phone signals are detected, it will give you an alarming so that you can know in time. Such mobile phone signal detector is widely used in many places and situations. For example it can be used in places as conference room, auditoriums, law court, library, exam room, school, cinema, theater, museum, hospital and so many other places where needs quiet. Besides it can be use in the places that cell phones are not allowed to be used such as service station, security services, military units, border patrol and drug enforcement, customs, etc.
http://www.jammergroup.com/All-Mobile-Phone-Signal-Detector-with-Alarming-System-p-522.html
