Waterproof Outdoor WIFI GPS Cell Phone Jammer (Worldwide use)

Product Description

 

• Heat sink designing combing with the fans to make system in a cooling status.
Special technology to prevent interference between each frequency band.
• Only interfere downlink frequency of mobile system, without disturb normally working of Base Stations.
• Frequency bands and output power selectable.
• Each frequency band controlled by independent RF ON/OFF switches.
• Power of each frequency band can be adjustable independently.
• Circuit protection to ensure system will not burn out in case of antenna short circuiting or disconnection.
• Antenna type options, directional or Omni-directional antennas option.
• Easy operation and installation.
• Keep for upgrade module installation.
• Working 24 hours/365days continuously.

 At a Glance:

  • Designed to cut off wave only in the downlink band width, therefore, it doesn’t affect any interference to base station and repeater
  • Remote Control
  • IP68 Waterproof Housing Outdoor design

Specification

  • TX frequency:

– GSM/CDMA : (US.850-894MHz) or (EU.925-960MHz)
– DCS/PCS : (US.1920-1990MHz) or (EU.1805-1980MHz)
– 3G : 2100-2180 MHz
– WIFI : 2400-2500 MHz
– 4G LTE: (US.725-770MHz) or (EU.790-826MHz)
– 4G Wimax (US.2300-2400MHz) or (EU.2620-2690MHz)

-WIFI2.4 : 2400-2500Mhz
– GPS L1 : 1575.42 Mhz

  • Cover interface standards: AMPS, N-AMPS, NMT, TACS, GSM, CDMA, TDMA, IDEN, UMTS
  • Total output power: 50W
  • Antenna: Patch Antenna – Gain 5 dBi of each band
  • Jamming range: distance 50-60 M [the signal intensity must < -80db in the location]
  • Automatic switching power supply 50/60 Hz AC 100 ~ 240V to DC 12V
  • Device Dimension: 38.5cm (L) x 43 cm (W) x 25cm (H)
  • Weight: 18.00kg
  • Operating temperature: -10 ~ +60°C
  • Storage Temperature: -30 ~ +70°C
  • Humidity: 95% non-condensing

Leave a Reply

You must be logged in to post a comment.