Advantages and Features
• Aluminum-alloy casing with high protection has high resistance to dust, water and corroding.
• Heat sink designing combing with the fans to make system in a cooling status.
• Special technology to prevent interference between each frequency band.
• Only interfere downlink frequency of mobile system, without disturb normally working of Base Stations.
• Frequency bands and output power selectable.
• Each frequency band controlled by independent RF ON/OFF switches.
• Power of each frequency band can be adjustable independently.
• Circuit protection to ensure system will not burn out in case of antenna short circuiting or disconnection.
• Antenna type options, directional or Omni-directional antennas option.
• Easy operation and installation.
• Keep for upgrade module installation.
• Working 24 hours/365days continuously.
Specification
- Affected Frequency Ranges: (8bands option)
-CDMA 800: 850 to 894MHz
-GSM 900: 925 to 960MHz
-GSM 1800: 1805 to 1880MHz (DCS)
-GSM 1900: 1920 to 1990MHz (PCS)
-3G: 2110 to 2170MHz
-4G LTE: (USA:725-770MHz) or (Europe:790-826MHz)
-4G Wimax: (USA:2345-2400MHz) or (Europe:2620-2690MHz)
-WiFi: 2400-2500MHz
-VHF: 136-174MHz
-UHF: 400-470MHz
- Total output power:400~800W
- Jamming range: up to 500m, the jamming radius still depends on the strength signal in given area
- External double channel directional panel antennas all the TX frequency covered down link only
- Power supply: 50 to 60Hz, 100 to 240V AC
- With AC adapter (AC100-240V-DC27V),
- Dimension: 420×480×130 mm
Accessories
- High Power Cell Phone Signal Jammer
- Antennas
Accessories
• Wired Remote Control Panel (option)
Vehicle Jammer has wired remote control function. And this remote control panel could be performed in the driver’s console unit. So it will be very convenient for the driver to remote control the jammer to turn on/off each module separately while driving.
With this remote control panel, the driver can turn off a specific frequency band to make sure the internal communication in emergency.
• Remote control switches of each machine.
• Remote viewing each machine working state.
• The power output of each machine remote adjustment.
• Remote viewing offline log of each machine.
