Product Description
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.
Features
l High gain, easy installation and operation.
l Full-duplex, single-port design, build-in power supply.
l Use ALC technology, adjust extent automatically
l LED Light Working & Signal Condition Indicators
l Big linear power, control intermodulation & saturation stably
l Dependability stand by GB6993-86 standard
l Compatibility of electromagnetism according with ETS300 609-4
l CE and RoHs Approved
Technique
Frequency range | 890-915/1920-1980 935-960/2110-2170 |
Gain ( dB) | Uplink Gp≥55 Downlink Gp≥60 |
Export power (Po) | ≥15dBm |
Pass band ripple | ≤3dB |
I/O impedance | 50Ω/N connector |
Noise figure | ≤4dB |
Transmission Delay | ≤0.5μs |
Ambient temperature | -10?pan>60?pan> |
Power supply | AC110240V 4555Hz |
Size | 204×120×37mm |
Reliability | To the GB6993-86 standard |
Electromagnetic compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote b) Export power LED denote |
coverage area | 800 m2 |
Installation Approaches
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to “outdoor” port in repeater machine through cable.
- Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If cannot call out, please adjust the direction of outdoor antenna.
- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20
Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc